heavytrailer

+49 (0) 231 72 08 40-0

info@heavytrailer.de

DE | EN

HRD 4 axle low-bed trailer with wheel recess, excavator pit and hydraulic ramps

HRD 4 axle low-bed trailer with wheel recess, excavator pit and hydraulic ramps Specifications

Total weight	58.000 Kg
Payload 80km/h	45.000 Kg
Empty load	13.000 Kg
telescopiec / extendable	2.800 mm
Gooseneck length	4.000 mm
Vehicle width	2.550 mm
Coupling height	1.200 mm
Loading height	880 mm
Loading length	8.600 mm
Manufacturer	HRD
Type	semi trailer
Axles	4
Steering	Self steering

rent- or sales price on demand by contact person:

Request more information.

Ralf Meissner

+49 (0) 231 72 08 40 - 13

Lennart Hinz

+ 49 (0) 231 72 08 40 - 19

Sascha Funke

+ 49 (0) 231 72 08 40 - 12

Technical drawing

Technische Zeichnung

Frame:

steel chassis
side frame as UNP-profile
chamfered rear and gooseneck with u-profile for loading ramps
pneumatic frame lockings all 500 mm for telescoping

Axles:

4 x 12.000 kg SAF axles with disc brake, first axle as lift axle and the last 2 axles are self steering
air supsension with lift and lower device (overall lift height 200 mm)
17 wheels (265/ 70 R 19.5)

Ramps:

hydraulic ramps (2.900 + 1.600 mm x 650 mm) incl. hydraulic side displacement

Brake unit:

load depending two line brakes
EBS Wabco VCS 4S 3M brake 2x60L/ air 1x80L screwed
spring controlled parking brake

Floor:

28 mm hardwood
in the range of the axles fitted with checker plates 6/8

Illumination:

24-volt lighting system RL 76/756/EWG
2 pieces of 7-chamber lights
2 pieces of 7-pole electric socket
1 piece of15-pole electric socket
1 piece of 3-pole electric socket for warning light
4 pieces of 3-pole electric socket for warning plates
side marker lights
corner marker lights
marker lights

Paintwork:

chassis RAL 3002
wheel rims silver
drop-sides eloxiert

Additional equipment:

10 pairs of side post bags in the side frame
u-profile at the gooseneck
1 pair of galvanised prop stands at the rear
1 pair of mechanic prop stands (Jost)
10 pairs of lashing rings (ca. 10 to.)
side underrun guards (aluminum)
1 pair of wheel chocks
1 piece of bulkhead (2.000 mm)
1 piece of toolbox on the gooseneck (behind the bulkhead)
3 pieces of pluggable drop-sides (800 mm)
2 pairs of wheel recess (ca. 450 mm) with access cover
1 piece of excavator arm recess ca. 3.200 mm length and ca. 220 mm deep
5 pairs of load supports (galvanised) for overrun the recesses and the front low deck, with hardwood
4 pairs of container lockings "Laxo" (2 x 20‘ and 1 x 40‘)
2 pairs of extandable warning plates with illumination
10 pairs of pull out side extensions for overall width 3.000 mm