heavytrailer

+49 (0) 231 72 08 40-0

info@heavytrailer.de

DE | EN

Maxtrailer 3-Achs-Tele-Plateau-Trailer

Maxtrailer 3-Achs-Tele-Plateau-Trailer, single telescopic, self steering Specifications

Total weight	ca. 45.000 kg
Payload 80km/h	ca. 36.800 kg
Empty load	ca. 8.200 kg
telescopiec / extendable	ca. 7.500 mm
Gooseneck length	---
Vehicle width	ca. 2.540 mm
Coupling height	ca. 1.150 mm
Loading height	ca. 1.300 mm
Loading length	ca. 13.600 mm
Manufacturer	MaxTrailer
Type	plateau trailer
Axles	3
Steering	Self steering

rent- or sales price on demand by contact person:

Request more information.

Ralf Meissner

+49 (0) 231 72 08 40 - 13

Sascha Funke

+ 49 (0) 231 72 08 40 - 12

Lennart Hinz

+ 49 (0) 231 72 08 40 - 19

Technical drawing

Technische Zeichnung

Loading area:

telescopic loading area with pneumatic locking
loading floor with wooden planks (ca. 30 mm) with bordering of Omega profiles
7 pairs of foldable lashing rings (LC 5.000 daN)
3 pairs of foldable lashing rings (LC 10.000 daN)
cutouts in the outer frame to hook in tensioning hooks (LC 2.000 daN)

Braking system::

braking system in accordance with EU-regulations with EBS-E (2S2M)

Axles/Tyres::

SAF-axles with air suspension
disk brake (430 mm)
lifting and lowering function
3rd axle = self steering axle
electromagnetic reverse lock of the self steering axle will be activated through reverse gear or manually
1st axle = lifting axle with control through T-EBS E depending on the current axle load and the current loading condition
Tyres: 385/65 R 22,5

Electric system:

Electric system in accordance with EU-regulations
lighting LED 24 Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connection bar with sockets 24N, 24S & 15-pin in accordance with ISO

Landing legs:

JOST landing legs (mechanical)
two-speed-gear
24t lifting load / 50t test load

Painting:

zinc dust priming (2 components)
one colour topcoat (2 components) (RAL)
tail part is metalized and painted (RAL 9010)
HRM (High Resistence Metallisation) of the outer frame
the whole steel contruction is shot blasted and is refined with ZINACOR 850

Additional equipment:

galvanised bulkhead (height: ca. 1.200 mm)
10 pairs of stanchion pockets for stanchions 100x50mm in the outer frame of the loading area
1x spare wheel holder
4x wheel chocks
1x mud flap at the rear
holder for beacon light at the rear
6 pairs of pockets for twistlocks (type WADER)
4 pairs of lateral rows of stanchion pockets for stanchions 100x50mm
1x galvanised lateral holder under the loading area (2.430x770x400mm)
4x warning plates
pressure gauge (weight) with load chart