heavytrailer

SAF axles (3 x 9.000 kg)
third axle self steering
second axle as a lift axle (two-sided lift)
axle lift control about SmartBoard
first and 3rd axle with ABS
locking the self steering axle obout the driver`s cab, about reversing light and from 55 km / h
WABCO air suspension with SmartBoard (ECAS), incl. lifting and lowering function
lifting axle and second driving position
6 tyres (455/40 R 22.5)

electronically controlled 2-line compressed air braking system (EBS), depending on the load including ABS
spring controlled parking brake

24-volt lighting system according to RL 76/756/EEC
single wiring
Hella EasyConn plug-in system
2 pieces of 5-chamber rear lights with integrated triangular reflectors
2 pieces of LED corner marker lights and side marker lights on rubber arms fixed at rear lights
2 pieces of LED license plate lights
2 pieces of white LED position lights with reflectors on the front end carrier
LED side marker lights at the outer frame and telescopic frame

7-pin socket on the front carrier for lighting
7-pin socket on the front carrier for ABS
3-pole socket at the left and right slope for extension-wide lighting
3-pole socket under the left and right rear frame for extension-wide lighting3-pole socket at the rear for about track lighting
3-pole socket at the rear for warning light

10 pairs of side post bags 100 x 50 mm embedded in the outer frame
3 transverse rows of side post bags
3 pairs of lashing points (3.200 daN) in the outer frame of the fifth wheel platform
8 pairs of lashing points (5.000 daN) in the outer frame of the platform
4 pairs of swing lashing points (13,400 daN)
1 pair of lashing points (13,400 daN) inside next to the main frame at the rear of the vehicle
1 pair of hand-mechanical landing legs
steel bulkhead (4 pieces of 4 mm front wall support carriers) 1,600 mm high, firmly welded
warning light
2 pair of telescoping warning plates (extendable to 3900 mm) with LED position lights
4 pairs of container locks (2 x 20 'and 1 x 40')
2 pieces of mechanical prop stands at the rear for drive-over operation support
3 piece PVC tool boxes (1.000 x 500 x 480 mm)
ramp storrage at the rear of the vehicle