+49 (0) 231 72 08 40-0
DE | EN | RU
Heavy Trailer AG

Heavy Trailer AG

Ihr kompenenter Partner

HeavyTrailer
HeavyTrailer

Heavytrailer 3-axle-plateau-trailer (building material)

Heavytrailer 3-axle-plateau-trailer (building material), with lifting axle and removable drop-sides Specifications
Total weight ca. 40.000 kg
Payload 80km/h ca. 33.000 kg
Empty load ca. 7.000 kg
telescopiec / extendable
Gooseneck length ---
Vehicle width ca. 2.480 mm
Coupling height ca. 1.120 mm
Loading height ca. 1.250 mm
Loading length ca. 13.600 mm
Manufacturer HeavyTrailer
Type plateau trailer
Axles 3
Steering
  • Heavytrailer 3-axle-plateau-trailer (building material)
  • Heavytrailer 3-axle-plateau-trailer (building material)
  • Heavytrailer 3-axle-plateau-trailer (building material)

rent- or sales price on demand by contact person:

Olga Dunker

00 49 (0) 231 72 08 40 -12

olga.dunker@heavytrailer.de

Ralf Meissner

00 49 (0) 231 72 08 40 - 13

ralf.meissner@heavytrailer.de

Technical drawing

Technische Zeichnung

Frame:

  • steel frame construction
  • steel chassis of welded longitudinal beams and pushed through cross beams

Axles/Tyres:

  • 3x SAF-axles (each 9.000 kg)
  • 1st axle is lifting axle (dependent on weight and speed)
  • air suspension with lifting and lowering valve
  • 6 tyres 385/65 R 22,5

Floor:

  • 28 mm hardwood floor, layed longitudinally between zinc-coated omega profiles

Braking system:

  • WABCO EBS 4S3M
  • EBS-diagnosis through CAN-bus (EBS-plug)
  • 22,5" disc brakes

Lighting:

  • 24V lighting system with huge multifunctional light
  • lighting for registration number
  • 2 marker lights at the front
  • side marker lights (LED) with reflector
  • 15-pin socket
  • EBS-socket
  • 2 marker lights (LED) at the rear

Painting:

  • zinc-coated chassis
  • rims: silver
  • anodised drop-sides

Additional equipment:

  • 6 pairs of stanchion pockets (70 x 40 mm) in the outer frame
  • 6 stanchion pockets (70 x 40 mm) in the middle of the floor
  • 6 pairs of lashing rings (ca. 5.000 kg) in the outer frame
  • landing legs (24 tons) with single sided operation
  • 1 holder for a spare wheel
  • removable drop-sides (height ca. 800 mm), 2x 5 pieces and 1 tailgate
  • bulkhead (height ca. 1.600 mm, with deedboxes, bolted, bevelled corners
  • holder for warning light at the rear
  • rear underrun (welded contruction)
  • side underrun on both sides
  • 2 pairs of extendable warning plates with illumination
  • 2 pieces of wheel chokes
  • twist locks for 2x 20ft or 1x 40ft
  • 2 pieces of tool boxes (stainless steel), behind the axles
  • changeable 2"-king pin